Author: hqt

The Importance of installing Quality Window structures

The switchable glass windows of many city houses overlook busy highways, tram lines, and places of large gatherings of people. Unfortunately, the owners of such apartments have to constantly hear extraneous sounds. This interferes with normal life and rest, and increases stress levels. By the way, sounds from 65 decibels and above negatively affect health and contribute to the occurrence of a number of diseases.

Switchable glass provides better sound insulation

So if a stormy life is boiling under your windows, you need to think about the most effective sound insulation. In this article, we will tell you which hardware elements are responsible for sound insulation and how to make plastic windows even better protect you from annoying and loud sounds from the street.

What materials provide sound insulation for a plastic window?

A common situation – earlier the window protected well from street noise, but now it copes with these functions worse. Most often, the reason is that the rubber seal is worn out, which is responsible for the tight fit of the sash to the window.

Therefore, it is necessary to remove the old gum, thoroughly clean the remaining glue and replace it with a new part. It is important that this manipulation is performed by an experienced specialist. Then the chances that the breakdown will be eliminated, and you can continue to enjoy the silence, are much greater.

Why do rooms become noisier?

Often the room becomes noisier due to the fact that the pvc doors do not fit tightly to the frame. Noise enters the room through the resulting gaps. A specialist in the switchable glass installation and repair of plastic windows will carefully examine the window opening.

With the help of silicone sealant and sealant, it will seal all cracks between the wall and the window. This also increases the sound insulation properties of window structures.

What can provide additional noise insulation for plastic switchable glass windows?

Thicker double-glazed switchable glass windows provide additional noise insulation for plastic windows. Also, a wider frame can be used to minimize the penetration of sounds from the street into the room. This increases the layer of air or gas that absorbs noise.

Triplex has excellent soundproofing properties – several double-glazed windows of different thicknesses, glued together with the help of a special resin. If you live in a very busy place, triplex is the best option for containing high and medium frequency sound waves. An additional advantage of the triplex is an increased level of security: even if it breaks, the fragments will not crumble.

Another way of additional noise insulation is filling the chambers of double-glazed windows with gases:

• xenon;
• argon;

Due to the air space between the glasses, sound is absorbed quite efficiently.

What are the best double-glazed switchable glass windows to choose?

First of all, those that are made by reliable manufacturers. If you purposefully want to buy a window with an increased level of noise insulation, pay attention to the “Rw” indicator. Do you live in a very noisy place? Choose the window with the highest Rw!

 

Also remember: the asymmetrical switchable glass windows have the highest level of sound insulation. In this case, the thickest glass should be installed outside.

Why it is important to buy quality window structure?

Summing up, we note that it is not difficult to achieve maximum sound insulation. The main thing is to buy pvc structures from a reliable manufacturer, do not save on installation, and promptly call a foreman to fix individual parts.

And one more thing – you need to watch the windows throughout the apartment, only then you can achieve the maximum effect and enjoy the silence, even if your home has a bus station or an entrance to the subway!

Privacy Glass in Homes is Future of Technology

The idea of ​​using glass in residential and office construction is not new. It began to be widely used in the last century. Today, with the help of glass or double-glazed windows, you can embody the most daring ideas of designers.

Thanks to modern technology, you can build real switchable glass houses. Of course, in a building completely made of glass, a person will be uncomfortable. But such glazing of a terrace, winter garden or one of the rooms is a fresh and original solution that brings a special atmosphere to the house. By the way, not only walls are made glass, but also roofs, partitions, doors, floors and visors.

Glass roof over the house: what is it like?

A glass roof can be made over the whole house or over some of the rooms. Most often, it is equipped over the living room, dining room or winter garden. In bedrooms and nurseries, this design is usually inappropriate. In order to enjoy the sky without hindrance, it is better to equip the bedroom with switchable glass located directly in the roof.

Installing switchable glass roof is technically challenging

In addition, in the summer it creates great difficulties and, in fact, turns into an analogue of a greenhouse due to the hot sunlight. Glass loses its translucent function under a layer of dust. So you need to think about how you will clean the roof surface.

Is the house solid with large glass elements?

Such houses only have a fragile appearance. When designing, great attention is paid to the reliability and safety of the structure. Modern technologies make it possible to improve the strength characteristics of a building.

For example, reinforced, tempered or glued glass can be used. If the profile systems for the house are of high quality, then the structure will be stable and reliable. Therefore, cooperate only with trusted manufacturers.

The main advantages of houses with large glass elements

First of all, such a house looks elegant and stylish and stands out among the neighboring cottages. He is an indicator of the good taste of the owners. Another great advantage is the large amount of natural light.

It has been scientifically proven that being in bright rooms where a lot of sun penetrates, a person’s mood and health are improved.

Other benefits of switchable glass houses:

Energy efficiency,

Because the costs of lighting and heating the building are reduced.

Environmental friendliness

Glass is a material that is safe for human health and does not cause allergies.

Saving

There is no need to spend money on decorating the walls inside and outside. In addition, glass walls do not need regular cosmetic repairs. It is enough to wash them periodically.

DIY Stencils for Window Decorations

New Year is two words that are associated with festive bustle and magic, home comfort and gifts under the New Year’s beauty. It is not enough to hang balls on the tree and hang garlands on the walls. It is very simple to create a maximum of festive mood – to decorate smart tint glass windows, which will turn the house into a real fairy tale.

Everyone decorates their home based on their own imagination. Someone prefers to buy ready-made decor, others make it themselves. The easiest option to decorate windows is to cut out snowflakes and attach them. This is not the only way.

Here is a small part of ideas on how to decorate smart tint glass

• Using toothpaste;
• The use of multi-colored garlands, including paper;
• DIY Christmas and New Year wreaths;
• Using paints for painting;
• It is a skill used to create New Year’s decorations on windows.

What materials are needed for smart tint glass decorations on the windows?

The main material used is paper. From it you can cut snowflakes on the windows, make garlands and other decor.

When creating a smart tint glass decor, the following materials are used:

• Cotton wool;
• Threads;
• Ribbons;
• Cones;
• New Year’s rain and tinsel;
• Beads;
• Balls;
• Other materials.

A minimum of ingenuity and time and your window turns into real magic.

Decor and window decoration options

Snowflakes

Before you decorate the windows with snowflakes, you need to make them. It is recommended to take white napkins, as they are quite thin and well attached. There is an easy method for decorating a snowflake:

1. You need to take a napkin and cut an even circle out of it.
2. Then bend the circle into 6-8 pieces.
3. Draw any ornament and cut along the contour.

In this way, you can make a large number of different snowflakes on smart tint glass, applying different patterns. You can also cut snowflakes from ready-made patterns.

After the required number of snowflakes has been cut, they are placed on the windows in any order or make up a certain composition that allows you to beautifully decorate the windows.

The decoration with a festive wreath looks elegant and creative. It is sold in almost every store, but it is better to make it yourself.

For the smart tint glass base you will need:

• A sheet of thick cardboard;
• Spruce or pine branches;
• Scissors;
• Glue gun;
• Golden satin ribbon;
• Elements for decoration: cones, balls, beads, rain, bows, ribbons, etc.

Smart tint glass manufacturing process:

1. Using a compass on a cardboard, draw a circle with a diameter of 30 cm, inside it another 25 cm in diameter. Wrap the resulting ring with a gold ribbon (it will help in fastening the branches and hide the gaps).
2. We proceed to fastening the branches. Similarly, we insert each branch into the ribbon pocket at the base and tie it with a thread. We fasten the branches along the entire base of the circle; fasten them to each other with a stapler.
3. Next, we move on to decorating the wreath. For this, decorative snow is used in the form of a spray and various New Year’s decorations. The decor depends solely on the imagination of each person.

Advice! Attach dried orange or lemon rings to the smart tint glass wreath. The aroma of pine needles and citrus will bring the holiday closer.

Garlands

With the word paper garland, rings connected to each other are immediately imagined. With a little imagination, you can make original paper garlands, for example, from stars.

For this you will need:

• Multi-colored shiny paper;
• Glue;
• Threads;

Process of creating smart tint glass windows:

1. Draw the required number of stars of different sizes on shiny sheets and cut out.
2. Take strong threads and glue the stars to it with the “Moment” glue. The stars can be glued in a chaotic manner. The garland is ready.

Festive decor made of gouache and toothpaste: instructions with examples

This method is very old. Our mothers also used it. You will need to dilute the toothpaste in water, take a sponge or sponge and prepare various New Year stencils. It is better to apply the paste with a sponge, because if you just spray it, you get a matte smart tint glass surface.

For those who have artistic talent, it is possible not to use stencils, but to create a drawing by hand.

You can draw beautiful patterns smart tint glass. This is quite easy to do:

1. Prepare and print your favorite stencils. To make a template for drawing, you need to stick the printed sketch on cardboard and cut out the middle.
2. It is recommended to use white and blue shades to create a winter atmosphere.
3. The prepared stencils are glued to the windows, and the empty spaces are carefully coated with gouache.
4. Wait until it is completely dry and remove the stencils.

Christmas stars can be a festive window decor. To create you need threads and wire:

Take a fairly soft wire and form a star sketch. We try to keep the rays of the star the same length.

We take knitting threads. To attach the threads to the sprocket, you will need Moment transparent glue.

Put some glue on the star and start wrapping the wire tightly with thread.

You can also wrap the star with threads along the contour so that it is not transparent.

Christmas balls

Christmas balls are not just for the Christmas tree. They also look great when decorating smart tint glass. The balls suspended from the ribbons will rotate each time the curtains are opened and closed. They can be placed singly or in whole bunches.

Vytynanki look great on the windows. To create the protrusions, only a sample and a clerical knife are used. You can find a wide variety of samples.

DIY stencils for window decorations for the New Year

Along with the samples available on the network, you can make them yourself. You just need a minimum of pencil drawing skills and your own imagination. On paper, you can choose a wide variety of templates for the New Year theme: mittens, felt boots, toys, garlands and much, much more.

If the skills of a young artist are missing, that’s okay. You can use stencils, print and transfer to cardboard. This template can be used for more than one year.

Decorate the cornice and windowsill

Decorating windows, do not forget about the cornice and the window sill. Various candles are perfect for decorating the windowsill, which will bring maximum comfort to the house. Tinsel and garlands can be used as an additional decoration. You can also create a fairytale village on the windowsill using various figures.

There are many sources of noise around us every day. Traffic on highways, mowing lawns, people’s voices and even the rustle of autumn leaves. Noise does not let you breathe out calmly after a busy day at work, overloads the head, and sometimes causes chronic fatigue. You can stop all this by installing pdlc film.

An opportunity to hide from the noise wave of the metropolis appears only at home. And then, if soundproof windows are installed in it , which do not pass a certain amount of decibels. Today I will talk about such windows and their functionality.

Soundproof pdlc film windows

Noise is an annoying source of inconvenience. It penetrates through any partitions. But at each obstacle, the flow of noise loses decibels. Therefore, soundproof windows are equipped with multi-chamber double-glazed windows.

There is an air gap between each chamber of the pdlc film glass unit. Passing through it, the noise level is reduced by about 35 dB. With such windows, the house becomes two times quieter than with single-chamber double-glazed windows.

For a greater effect, gas with a low resonant frequency is pumped into the chamber distance. For example, argon. It eats up another 1-2 dB of sound.

Finally, windows with different inter-glass spaces are best protected from noise. Thanks to this, sound vibrations are gradually reduced and the noise does not reach the owner of the house.

Crystal pdlc film barrier

Triplex glass has received the role of an alternative or addition to multi-chamber window soundproofing. It consists of several layers glued together with a polymer film.

Triplex absorbs at least 35 dB of noise. And as a pleasant addition, it also provides increased strength and safety. If damaged, it does not crumble into dangerous fragments – the film holds them in place. Ideal windows for a nursery.

How to improve sound insulation?

It happens that in pursuit of the thermal and aesthetic characteristics of windows, people completely forget about sound insulation. The pdlc film windows have already been installed, but there is no way to change them. But there is a way out of such a situation.

Sometimes banal hardware adjustment saves from street noise. It is important that the sash fits snugly against the frame. Otherwise, the sound freely penetrates through the cracks. Read more about this in the article “How to adjust plastic windows?”

Third-party attributes of protection also protect the room from the roar of the street. For example, soundproof blinds and roller shutters. They absorb 3-5 dB of sound.

Properties of pdlc film windows

The properties of the entire window structure, the comfort of staying at home for each family member depend on the qualities of the glass unit installed. And in the harsh climate of Russia, the ability to save heat is especially relevant. This article will focus on energy-saving double-glazed pdlc film windows, their features, advantages and disadvantages.

Design features of a heat-saving plastic window

Contribute to the effective maintenance of a favorable indoor climate. Thanks to a special sputtering of a thin layer of metal ions, they work according to the “thermos” principle, keeping the heat inside the room. This allows you to reduce heating costs, gas consumption.

Pdlc film glass also actively reflects the sun’s rays. This allows you not to overdry the indoor air in the spring and summer. You will be comfortable at home in hot weather without the constant use of the air conditioner. In addition, curtains, furniture upholstery will retain the brightness of colors and will not fade;

Filling the chambers with argon

This inert gas has a lower thermal conductivity than air. It lacks water molecules – the main conductor of heat. The argon circuit helps to improve the thermal insulation properties of the entire structure; polymer frame.

PVC is characterized by low thermal conductivity. Polyvinyl chloride is resistant to negative environmental factors, withstands well wind, snow and other atmospheric loads.

Pros and cons of energy efficient windows

 

According to experts, such models are new generation systems. Their installation is advisable for the following reasons:

• In terms of heat conservation, they are 4 times more efficient than structures made of aluminum and wood;
• help to minimize the cost of air conditioning and space heating;
• help to improve sound insulation; are characterized by high fire resistance. The structures do not support the combustion process;

Well pdlc film withstand the changing seasons

Can be used in a wide temperature range (-80 ° С to +100 ° С);

No condensation forms on the glasses. However, it is important that experienced installers carry out the installation. In the process, there should be no depressurization of the profile.

The disadvantages of structures include the price of structures, as well as the fact that magnetron sputtering wears out over time.

 

What is the difference between an energy-saving glass unit and a conventional one?

Before ordering, it is necessary to study the pdlc film product documentation. Since glazing is a long-term and expensive investment, it is advisable to buy window systems directly from the manufacturer. As a rule, there is always a marking on the window body, which is applied to the glass automatically.

Therefore, when buying windows you can be confident in the accuracy of the information. If you do not know how to check an energy efficient glass unit, then do a little test. Bring a lighter or burning match to it and look at the reflection.

The colour indication of smart films

The number of lights is related to the number of chambers, and their color indicates heat saving properties. So, i-glass reflects the infrared spectrum towards the room. Therefore, in energy-saving designs, you can see a blue, greenish or reddish light. In standard flame models, you will see a red-yellow flame.

Energy-efficient windows: myths and reality

Many people start to be overcome with doubts before making a purchase. Let’s consider each of them in turn.

Myth 1. You can’t see anything through energy-saving glasses

The light transmittance of standard glasses and heat-efficient ones is no different. You will be able to enjoy the view outside the window as well as before.

Myth 2. Energy efficient windows are very expensive

The cost of heat-saving pdlc film models is only slightly higher than that of standard models. Every buyer can afford them.

Myth 3. There is a film on the surface of an energy-saving window

No, it’s not like that. There is no tinting; the spraying is applied on the back of the glass. It is impossible to feel or view the film.

In the understanding of most people, glass is a fragile material. There is some truth in this. Previously, the glass really shattered into smithereens, it is worth unsuccessfully to touch them. However, with the development of glass craftsmanship, the once flimsy translucent products began to gain strength.

What are the major applications of pdlc film?

Then triplex appeared – glass with increased strength. Today, it is used to protect shop windows, glaze vehicles, and create double-glazed windows.

In a new article I will talk about the use of triplex in window constructions. You will find out why a double-glazed window with triplex has become the choice of those who are trying to protect their home to the maximum.

Conclusion

Now you know how to distinguish an energy saving pdlc film package from a standard one. In the conditions of the climate, its advantages are obvious. In this case, investments in glazing will definitely pay off.

HOW TO CHOOSE THE RIGHT WINDOWS IN A PRIVATE HOUSE?

How to choose privacy windows for home from a variety of offers on the market so that they meet all your needs and technical requirements as much as possible, as well as fit into the overall interior of the room? So, below are recommendations for the correct selection.

privacy windows for home profile

The metal-plastic window profile is the basis of the entire structure. Moreover, strength and reliability, as well as appearance totally depend on it.

Accordingly, the wider the profile, the more expensive its cost will be.

Energy-saving double-glazed windows – warmth in your home. Double-glazed windows are as important as the profile itself. Basically, double-glazed windows differ in the number of cameras and energy-saving characteristics.

Double glazed privacy windows

Double-glazed privacy windows for home are the most popular. In fact, they consist of three glasses with an air chamber between them. In such chambers, there can be an inert gas (argon or krypton), which is much more efficient in retaining heat inside the room.

Hence, they are suitable for installation in apartments and houses. They differ from the previous ones in improved noise insulation and heat saving due to the use of inert gases.

Insulation of slopes and window sills

Materials such as plastic panels, drywall and plaster can be used as finishing of window slopes. Actually, plastic is a more modern and convenient material to install. Also, have great advantages over other materials:

• high level of thermal insulation, noise insulation and relatively low cost
• Moreover, it does not need additional revision
• Has an aesthetic appearance
• Temperature discomfort

You can often feel cool in the room in winter and hot in summer. To eliminate discomfort, professional glass windows are ideal. They help to save money on utility bills – air conditioning and space heating. These glasses not only “trap” the heat inside the room in winter, but also reflect the sun’s rays. Therefore, the air in the rooms will not dry out in summer.

Privacy windows for home for summer cottages

Lack of light

Sometimes the soul requires dramatic changes in the interior of the apartment. We move furniture from corner to corner, change wallpaper color and lay fancy rugs. Over time, these details become boring. Then it’s time for major changes. For example, changing the layout.

A running option for redeveloping a room with privacy windows for home is to combine a kitchen with a balcony. So the zone of culinary experiments begins to play with new colors, more free space appears. How to bring such an idea to life? You will find out about this today.

Simple profile shapes

Do you like non-standard solutions? Then rectangular ready-made windows are not for you. We work with any shape: both standard rectangular and round, oval, asymmetrical, etc. Our specialists take on even the most complex orders.

At the same time, we guarantee that plastic windows for summer cottages will be made according to your dimensions with an accuracy of a millimeter. At a convenient time for you, our specialist will come to you and take all the necessary measurements.

 

Thanks to such precision, there will be no problems in the installation and subsequent operation of the windows.

Outsider views of privacy windows for home

Windows for summer cottages with privacy windows for home technology change their transparency in a second. They will hide you from the gaze of neighbors or passers-by, which is especially important for dense cottage buildings or low transparent fences.

At the same time, unlike standard single-chamber windows with fabric curtains, they do not require complex maintenance.

Glazing stained privacy windows for home

A new trend in cottage glazing is stained-glass windows. Now the unique art of medieval masters of composing whole paintings from pieces of glass is available to everyone.

Of course, today stained-glass windows are not made from separate fragments connected by a metal bridge – this design is not very reliable in terms of heat and sound insulation.

Modern technologies imply the use of colored film and lead tape for plastic windows for summer cottages.

What windows are installed in cottages?

A cottage is already a large field for various design project implementations. The fact that you won’t surprise anyone with ordinary windows is understandable, but here’s how to surprise your neighbors? Actually, you can start it with unusual window shapes.

Considerably, in cottages and country houses, as a rule, standard rectangular windows are installed. Hence, for clients who prefer individual architectural styles in design and construction, our range includes custom-built windows: arched windows, triangular, trapezoidal, round and polygonal.

Arched windows and doors

Arch-shaped privacy windows for home in private houses are becoming more popular every year, because their design gives a unique appearance to the architecture in which they are installed.

This technology offers a number of advantages:

• class A tightness and heat saving in the room;
• all arched windows can be made opening without loss of structural rigidity

Special double-glazed windows provide a high level of protection against street noise. Similarly, the minimum radius of an arc in a plastic arch is 32 cm.

The balcony block consists of a window and a door, while performing a connecting and separating function. Essentially, it separates the living room, providing free access to a balcony or loggia, and makes it possible to ventilate.

Depending on the type and characteristics of the profile, this structure has a chance to become a noticeable interior detail.

Professional privacy windows for home

The professional privacy windows manufacturers offer a wide variety of forms of window structures and color options to choose from. This enables the consumer to supply a balcony block that fully complies with his ideas about aesthetics and comfort.

Types of balcony blocks

1. Standard balcony block.

It is the most economical and demanded option. Basically, this design involves a blind window with a door to the balcony, equipped with a swing mechanism. Due to the presence of a minimum number of mobile systems, the price of such a unit is very low.

However, the balcony door of this profile is not fully glazed, but its lower part is covered by an opaque sandwich panel.

2. Plastic balcony block with door and swing-out window.

Its installation will cost a little more in price, but such a combination of elements guarantees improved air exchange. Such a window can be solid or divided, depending on the dimensions of the opening.

In the second case, to reduce the cost of construction, one of its parts is not equipped with a swing-out system, but remains deaf.

3. A window unit with a French-style balcony door.

This type of block consists of two fully glazed doors from floor to ceiling. Generally, it is installed in modern apartments, cottages and private houses.

The design of the exit to the balcony with a French window guarantees maximum light penetration and an impeccable view. But here you will definitely need an opaque curtain, especially if it is a bedroom.

In fact, installing balcony privacy windows for home of this type in old buildings is not always possible, since for this it is necessary to disassemble part of the wall, which can be quite expensive and problematic.

Conclusion

Now you know which windows for a summer residence to choose for you. If you have any difficulties, please contact our managers for help. We will select a design that meets all your needs.

How to choose the right windows for the balcony?

To answer this question, you need to determine the reason why you decided to electric privacy film on the balcony or replace old ones.

New glazing of balconies and loggias can enlarge the room. It can change the design of the room, add coziness, reduce heat loss, and make the room quieter.

However, you can consider various types of glazing structures: PVC profile, sliding, aluminum, frameless. And also you need to pay attention to the fact that aluminum glazing can be both warm and cold. Hence, it all depends on your needs.

Which factors are important in choosing electric privacy film?

An important electric privacy film factor will be the choice of the profile of metal-plastic products. However, the professional profile has proven itself well among our customers from Ukraine. The company offers a wide range of metal-plastic profiles. Thus, these profile systems offer maximum energy saving and sound insulation performance.

The size and cost of the structure depends on the type and size of your balcony. If the loggia is several connected simple plastic windows, then the balcony (outer part of the building) is:

• L-shaped
• u-shaped

L-shaped balcony

Thus, if you look at it from above, then it resembles the letter G, with one side part connected at an angle by a stand. For such a design, the most common opening option is a pivot sash in the front of the balcony. However, the side window, depending on the needs, is made deaf or with opening.

• L-shaped balcony
• U-shaped balcony

Privacy film for balcony window

However, if you look at such a balcony with electric privacy film from above, it resembles the letter P. Such a balcony has two side parts connected by corner posts. On the front, balcony windows are most often equipped with opening windows, and side windows are less common.

Thus, for better lighting of the room and a beautiful appearance, we recommend the popular glazing option – a French balcony with double-glazed windows to the entire height of the balcony.

Loggia

The loggia is an integral part of the living space; it has only frontal glazing with opening and does not need lateral reinforcement. However, in new buildings, loggias of different sizes predominate noticeably. However, there are also arched structures of loggias.

Important! Think over the number of opening doors of the loggia initially, so that it is convenient to wash the windows from the street side. If you are on a sunny side, inquire about sun protection options.

Having thought over everything to the smallest detail, you will save money, time, and most importantly. Your new loggia or balcony will serve you with benefit and will meet your expectations.

Balcony block with electric privacy film

Having started external glazing, do not forget about the balcony block. The balcony block consists of a balcony door and a plastic window next to it.

 

A balcony door can have two types of opening:

1. standard (swing) and
2. Hinged (for ventilation).

The electric privacy film nearby can be swing or swing-out, but often it is made deaf (without opening). To achieve maximum energy efficiency, it is better to exit to the balcony from a warm profile, install energy-saving double-glazed windows.

Installation of metal-plastic structures

The installation of a balcony block takes a little time and it carries out in several stages: dismantling the old one, installing and fixing the new one. But plastic balconies and loggias are installed for a long time, using special fasteners, and sometimes welding.

A window with a balcony door is installed simultaneously without gaps between the profiles (through a special sealed connector).

Plastic balcony structures require the installation of reinforcing elements, connectors, posts, for reliable fixation and strength against wind loads. Additionally, installers install visors, ebb tides, mosquito nets.

Remember! High-quality installation of products is one of the main factors for a successful result, their further trouble-free use.

Installation of a metal-plastic balcony block and electric privacy film on the balcony at the same time is a rather lengthy procedure, but such a replacement has its advantages. You will save on delivery, installation, measurement; all “dirty” work takes place in one stage.

High-quality installation of metal-plastic windows

We will tell you why it is important to perform high-quality window installation, as we do using electric privacy film installation technology.

Electric privacy film glazing types

Double-glazed windows can be single-chamber (two glasses) and two-chamber (three glasses). Do not confuse with cameras in a plastic profile, it can be three, four, five-chamber and more (even eight-chamber).

For a balcony block (if the balcony or loggia glaze), you can get by with the basic option: a single-chamber energy-saving double-glazed window and a three-chamber profile. For loggias and balconies (for better heat and sound insulation), it is recommendable to choose a two-chamber double-glazed window and a five-chamber profile.

Electric privacy film Rates

For a window with a balcony door and windows for a balcony, the price may vary depending on the profile system and the type of glass unit.

When glazing a new cottage or an expensive apartment, the real priority of the customer will be the reliability of the operation of the windows, their energy efficiency, and a fair price-quality ratio.

It is easy for such customers to get the right choice of windows for their money, unless the selection entrusts to a construction contractor.

Choosing a supplier, the customer will pay attention to the real reputation and experience of the manufacturing company, reviews of friends and just reviews about the company on the Internet.

How to choose the right windows for cottages and new apartments?

Contact a company with a proven track record

The first tip for these customers is to contact a reputable electric privacy film company regardless of size. It can be a manufacturing company or a dealer company with many years of experience, but the common characteristic is the tangible customer involvement of the owner and real control over customer satisfaction.

The personal control of the responsible owner is the best guarantee. A company with a good reputation will offer you several options for windows with different energy efficiency. Such company will provide an appropriate level of service, professionalism in measurements and installation.

Moreover, it will responsibly advise you on complex technical solutions, namely:

• correct insulation of adjacent zones
• the necessary reinforcement of the structure
• high-quality installation materials and
• other technical nuances in your specific situation.

Pay attention to the company’s price niche

The second tip – pay attention to the number of window brands that the company offers you. A dealer who declares his readiness to supply windows of any price from various manufacturers, as a rule, is more focused on selling any windows than on real customer satisfaction.

If a dealer sells a lot of the cheapest metal-plastic windows of the appropriate quality, then he cannot always provide professional measurements, technical competence in details and professional installation of really good windows.

Conclusion

Remember, does the quality of a bad doctor’s recommendation depend on how much you pay him? It is about the same with electric privacy film: there are many technical nuances that require experience, so that real specialists clearly understand the value of a reliable manufacturer.

Main features of Blasted/insufilms for cars

Smash and grab film suppliers are already an important part of any architectural project. After all, they fulfill important functions. For example, they block the entry of ultraviolet rays (which are bad for people’s health and damage objects). And give more privacy to a room or property as a whole.

There is a great diversity of films, with different colors, materials and levels of transparency. Therefore, some people are indecisive when it comes to contracting the film installation service, not knowing for sure which smash film would be ideal for their space.

In this article, we will talk specifically about smash and grab films film, highlighting its characteristics and where it can be applied. If you are thinking of buying films of this type, check out everything we have separated here before! Good reading!

How are smash and grab film made?

Sandblasted films are generally made of polyester, with the intention of giving the same effect as a glass that is originally sandblasted, which tend to be much more expensive than ordinary ones.

Insulfilm of this type can be made in different colors and styles. There are those who prefer glass entirely with the sandblasted effect, while other people add some details to the films, such as frames, stripes, waves, bands or other visual effects.

For this reason, sandblasted films are widely used in contemporary projects, both for composing interior and exterior design.

Does smash and grab film enhance privacy?

It is important to highlight that, due to their composition, smash and grab film suppliers increase privacy, but without interfering much in the entry of natural light. In other words: they give a visual effect that increases the feeling of privacy, keeping the environment well lit naturally.

Where can Blasted Insulfilm be applied?

Sandblasted films can be used outdoors and indoors. Its installation is not complex, which increases (even more) its versatility.

We can install sandblasted insulfilm on glass for doors, windows, partitions, facades and other surfaces. They are widely applicable to share spaces, such as in meeting rooms, specific areas of airports, offices, offices, gyms and the like.

In addition to public and / or commercial places, blasted films are also commonly good in homes. We use them in bathroom stalls, bedrooms, reading rooms or in any other type of room.

What are the benefits of blasted films?

We’ve already seen how blasted films are and where they are easy to apply, right? Now, it is important to say that blasted films have a number of benefits, notably:

They are easily applicable. The low complexity in the application process of smash and grab film suppliers are one of its great advantages. It is also worth noting that they are easy to clean. It is essential for everyday life, especially in places with a large number of people.

Choosing the best film for your environment can be tricky, given the many options on the market. If you still have doubts, it is interesting to have the guidance of a professional.

Automotive Film Types

There are several types to put in your car. The variations range from transparency and thickness to the desired color. With this much choice, it is a fact that even the most varied tastes will be served by the market offer.

However, we can say that there are three types of this film considered to be the most common: basic, advanced and security.

The first option is the most popular film in stores. Having a varied transparency, this version usually has an effect only on security.

Is smash and grab film is useful for cars?

The advanced, however, helps to keep the interior of the car more ventilated when it is stopped in open places. Considerably more expensive than the basic film, this version has the differential protection against UV rays.

 

Finally, the security film stands out. There are those who think that this security in question is in relation to the transparency of the interior of the vehicle. However, the benefit is another: having a thicker film from smash and grab film suppliers, this automotive film helps to contain broken glass in the event of accidents – in addition to making it difficult to crack.

Maximum limit of automotive film on car windows

The limits vary from glass to car glass. The windshield, for example, is one of the components in which the film must be clearer. In that case, it is necessary to have a transparency of at least 75% of the vehicle’s interior.

Well below that limit is the driver’s window – important for the authorities to identify who is driving. In this glass, the limit imposed by law is 30% visibility.

 

The rear window, on the other hand, needs to have a transparency very similar to the windshield.

Automotive film benefits and utilities

It is important to know that the benefits related to automotive film go far beyond safety. Depending on the vehicle film installed, the thermal comfort inside the car will be much greater than without the adhesive. The protection against UV rays helps to keep the temperature of the vehicle in order. It is without the feeling of being inside an oven. With smash and grab film suppliers, it is also possible to avoid the physical wear of the driver.

In addition, many consumers find that automotive film makes the car much more beautiful, due to the darkening of the windows.

Privacy films increase car security

And, of course, it is an item that helps – a lot – in security. Car thefts are common in big cities. In this sense, preventing anyone outside the car from seeing the contents inside can help prevent the action of thieves. Without knowing what they have in the vehicle and, mainly, who is inside, it is more difficult that they choose to carry out the assault.

Disadvantages of the glass film

As much as several benefits are related to the use of this glass sticker, there are, however, some negative points that must be considered by the car owner when placing it in the vehicle.

During the night, depending on the film used, the driver may have some of his visibility impaired. To avoid this, reconsider the desired darkening on your car windows – especially on the windshield. The accessory can also make it difficult for the driver to see during heavy rains and hail.

If darkening the smash and grab film suppliers’ windows makes it difficult for thieves to see inside your car, so does the police. If something is happening inside your vehicle, the automotive film can make it difficult for the police to identify the act.

Is insulfilm the same thing as automotive film?

Many people have this doubt, since it is common to hear the term Insufilm around. In fact, Insulfilm is one of the automotive film brands.

As it was a brand that became popular in Brazil, people started calling all automotive films Insufilme. But in reality, it is the same thing.

Is smart electronic glass magic?

As technologies is making innovation day by day. The switchable privacy glass also has brought an innovative change in the field of architectural and interior designs. You can make your buildings from public to private with just a flip of a switch.

Is it sound like magic? Yes, it is.

Today we are going to discuss the working principle of this magic glass. As well as we will also discuss that in how many ways this smart glass can help you. Moreover, is switchable glass expensive for you?

Come with us to reveal the magic behind it!

What is a switchable privacy glass?

Basically, switchable smart glass is an extremely unique way to allow a traditionally static material to become alive and multifunctional. This is a highly advanced technology that allows transparent materials from clear to shaded or totally opaque.

Moreover, this switchable privacy glass has added extreme versatility to the overall structures of your residential and commercial buildings. This smart glass can not only make your buildings more innovative but also add extreme privacy according to your needs.

So, that’s why we also call it a privacy glass. In fact, this smart glass is a dynamic glass. This technology not only provides extreme privacy but also can control various forms of light including visible light, IR, and UV.

How does switchable privacy glass work?

You can switch the glass from a transparent form to an opaque or translucent form with a simple flip of a switch. Moreover, you can also change your glass by the wave of a hand or tap of an app.

This advanced glass makes available a dynamic space that can be both open or private. Its working principle is very simple and unique. The switchable privacy glass makes use of the electrical current in order to arrange liquid crystal molecules into a pattern.

Further, this pattern can make the glass transparent when turned on. Hence, when you turn off, the LC molecules revert to a random pattern, diffusing the light. Basically, this diffusing of the light causes the glass to change into an opaque condition.

What is smart glass used for?

This smart technology has been growing slowly over the past few years. But its popularity is increasingly growing with each passing day. It is useful for privacy as well as opens an array of possibilities for interior designers and architects to control

• Glare
• Light
• And UV radiation.

Its demand is increasingly rising as it is ideal to use for heat and light control, privacy, and automated shading. Moreover, switchable privacy glass is also getting great popularity for its design innovations.

This electronically switchable glass is highly durable. Additionally, it is a perfect choice to use for venues such as bars, restaurants, and business centers.

In how many ways you can use switchable privacy glass?

This smart electronic glass can change the color of your doors and windows as well as add great visual privacy. In addition, this technology is highly beneficial to reduce glare and solar energy. We are presenting here some incredible uses of privacy glass.

 

Let’s have a look!

1. This smart glass generally promotes great privacy
2. It can add a professional touch to your business
3. This electrical smart glass gives the wow factor to your home
4. It prevents UV and other harmful rays to enter your home.
5. So, it is ideal for protecting your furniture as well.
6. You can build your own brand by applying sleek designs to your office building
7. Make an opening statement by using the creative designs of this magic glass.

Hence, for these additional features, switchable privacy glass is ideal to use in residential, retail, commercial, hospitality, healthcare, and banking.

Why you should prefer a smart glass for perfect heat management?

Nowadays modern architects are designing skyscrapers by using this smart electronic glass. Basically, they use solar-tinted blackout glass as it is better to manage heat. Moreover, with the help of solar-tinted mode, they protect the inside of the skyscraper from dangerous rays of sunlight.

Such as UV rays and save from extra heat to cool down the building. Further, it helps to reduce the need for expensive air conditioning units. In addition, during cold months it is very effective as it permits daylight to enter the building. This smart glass provides adequate heat and reduces the reliance on electric heating systems. Basically, electric heating systems can often create a large expense in large buildings or skyscrapers.

So, choosing switchable privacy glass will be a wise choice to use for perfect heat management.

Can you see through privacy glass at night?

In fact, it depends on your choice as there are several kinds of smart glass in the market. If you select a smart glass that is brighter from the outside then you can easily see through the film from the inside out.

But electrical privacy glass that you have selected is brighter from the inside then it will be possible for you to see from the outside at night.

How smart glass eliminates the need for window coverings?

It is actually a perfect choice for your office use. The old and traditional window coverings create hassle in the design process. Moreover, switchable privacy glass will enhance the aesthetics of your office and will create sleek partitions.

These sleek partitions are extremely versatile and functional. Actually, using blinds and curtains in hospitals and clinics come with the additional costs of frequent laundering as well as harbor germs. But using switchable smart glass improves germ management in hospitals and clinics.

This glass is also useful to reduce the amount of time spent adjusting blinds and curtains to block the sun. Since it can continue its constant motion throughout the whole day.

By using switchable smart glass, all you have to do is just flip a switch and the glare will be completely blocked.

Why smart glass is an impressive choice for luxury bedrooms?

In fact, switchable privacy glass can provide a desirable and elusive combination of a fashionable stunning interior aesthetic with on-demand privacy. so, this smart glass is an impressive choice for luxury bedrooms and hotels.

The switchable privacy glass is a smart and very attractive choice for your clients or end-users.

It is highly beneficial to get instant privacy when they need it while also having the option to maintain their view of the outside world.

How long does smart glass last?

As we have explained that smart glass has several advantages over traditional blinds and curtains. But some people may think that whether this smart technology is durable or not. It totally depends on the material used by different companies.

A good quality smart glass can last longer up to 10–20 years. It is actually a drawback of this electrical glass. and because of this fact, most homeowners do not take an interest to use it as they want a permanent solution for their windows.

Is switchable privacy glass expensive?

Generally, these smart glasses are custom designed for your whole interior. So, switchable privacy glass can be an expensive choice. Further, its price can run tens of thousands of dollars, depending on the number of electrical glass windows you need.

The possible price will be $50 to $100 per square foot for smart glass windows. On the other hand, if we compare it to the regular glass window, it will be costly. Since the price of regular glass is $10 to $15 per square foot.

Conclusion:

The use of smart electrical glass can be expensive to use but it is extremely advantageous. Moreover, it not only adds style and beauty to your homes but also creates savings, customization, and flexibility in your space for years to come.

The switchable privacy glass provides optimal UV protection as well as is an effective alternative to traditional methods of light and temperature control.

How does the Anti-Vandal Film work?

Do you know the Anti-Vandal Film? Do you know the purpose of this safety accessory? This type of electric blackout glass film is becoming more and more common, as every day the traffic violence gets bigger and stopping at a traffic light is more and more dangerous.

What is Anti-Vandal Film?

It is a film comprising of polyester blades that can increase the resistance of the glasses against impacts, mainly of blows.

But with the film, won’t the glass break? It can even break; however, the film will serve as a kind of protective layer, preventing the glass from shattering and the window ending up breaking completely.

As the name implies, the Anti-Vandal Film will protect you and your family from burglaries and robberies, where the bad guys can break the glass, stealing and hurting those inside the car.

How does the Anti-Vandal Film work?

As the name implies, the Anti-Vandal Film serves to hinder the thief’s access to the vehicle interior, but its benefits do not end there.

Because it serves as a kind of “protective electric blackout glass film”, it prevents the glass from breaking completely and the shrapnel from reaching those inside the car.

This is not only for strikes and assault attempts, but also for crashes and collisions. The chance of the glass breaking is much less than when compared to a glass without film.

Another important point that we must highlight about the Anti-Vandal Film, is that it protects against 99% of UV rays and rejects up to 79% of the sun’s heat.

With this, the driver will have more visual stability and the climate inside the car will be much cooler than the conventional one.

How does the electric blackout glass film work?

Before investing in any Film, be it Anti-vandalism or normal, it is important to research and find out which has allowance by the National Traffic Council.

Electric blackout glass film can be banned if it is too dark, so be aware of the percentage of transparency.

So, on the windshield there must be a minimum transparency of 75%. In the front side windows, the minimum transparency is 70%. In the rear windows, less transparency of up to 28% is possible.

Failure to comply with the law can lead to a fine of R $ 195.23 and the loss of five points in the driver’s license, in addition to the removal of the accessory.

5 doubts about the use of electric blackout glass film

You are looking for alternatives to ensure thermal comfort in projects, but you still have some doubts about the use of glass film. To help you stay on top of the use of this material, below we answer the most frequently asked questions about 3M solar control films. Check out:

# 1. Can I install the glass film on my own?

3M glass films must apply by trained professionals to ensure product warranty. Almost all films have design for application from the inside of the windows and only a qualified supplier will know how to indicate and install the ideal model for each environment.

Do I need to prepare the site for the electric blackout glass film application?

Yes. The first step is to prepare the window area for application. Cloths should present on the floor and protect your furniture or placed elsewhere. Then, the window glass must clean with common cleaning products (usually water and ammonia).

After that, the electric blackout glass film is sprayed with a solution of water and detergent to allow it to slide and correct positioning. And then we apply it to the window. Using a professional squeegee and following appropriate techniques, the application is completed with the removal of excess water, elimination of the film ends and a final squeegee passage to dry the tips.

# 3. I put the film on the glass and now it has bubbles. What do I do?

Film drying is not immediate. Ideally, the glass film should be left to dry and cure for 30 days. During this curing process, it is normal for water bubbles to form or for the film to appear cloudy. This will disappear when the film dries. Depending on the type of film and the climatic condition, it can take up to 45 days for this process to occur. .

# 4. How should I clean the electric blackout glass film?

After thirty (30) days, you can clean the glass films using common cleaning products, including those based on ammonia. For example and a soft, lint-free cloth or fabric. You can also use a squeegee for cleaning. Abrasive products that may scratch or damage the film should not be used.

# 5. How do I calculate correctly to obtain thermal comfort in the environment?

There are calculators that allow the impact on energy consumption to be calculated from the air conditioning calculation. 3M provides a calculator that takes into account the environments that use solar control films.

When entering in the table information such as country:

• City
• type of glass used
• model of film to be used
• cost of electricity
• cost of floors in the building
• length of the building

With this information in hand, it is easier to correctly size the air and thus reduce the consumption of electricity.

Were you able to clarify your doubts? We are available to provide more information about the product.

Sun protection films reduce electricity consumption

The constant rise in climatic temperatures and more affordable prices for air conditioners make it possible to install new electric blackout glass film. the perspective is that by the end of this century, the total of homes with this equipment will jump from 13% to 70%, according to a survey published in the magazine of American Academy of Sciences (PNAS).

For the environment, this information is a great warning sign. The refrigerators and air conditioners release hydrofluorocarbons (HFC), a gas more potent than carbon dioxide (CO2), which contributed to the acceleration of the greenhouse effect in the atmosphere and to the aggression of the ozone layer.

Exaggerating its use can have negative impacts on the environment and also compromise people’s health, especially if the correct maintenance of the air filter is not carried out.

How to reduce the consumption of air conditioning?

The first step is to adopt measures for the conscious use of air conditioning.

If the building’s facade is made of glass, for example, the solar incidence in the environment is large, which consequently increases the feeling of heat.

In this sense, the sun protection film is usually a good option to reduce internal heating and decrease the use of air conditioning.

In some cases, it even reduces the heat by up to 7 degrees centigrade and, as they block 99.9% of UV rays and 97% of infrared rays, they still protect the furniture, carpets and curtains of the place, preventing their fading.

Conclusion

Another advantage of electric blackout glass film is that it guarantees high brightness in the environment, making it possible to stay part of the day without turning on the lights – which significantly impacts the consumption of electricity.

How to update the interior of a children’s room with Privacy glass

Items in the children’s room very quickly lose their original appearance, and sometimes the child just grew up and he no longer likes drawings with cute teddy bears or bunnies. When buying new furniture, you need to spend a lot of money, which is often beyond the power of parents.

Dynamic glass film for children’s furniture will be an excellent option to completely change the interior for little money.

Renewal for old items

Now in the markets, in stores, there is a wide range of children’s films. They come with all kinds of patterns, patterns, colored, monochromatic, mirror, holographic, for drawing, imitating various natural materials. In order to please the baby and find out what exactly your children prefer, take them with you, together choose the option you like. After the whole family, you can paste over interior items.

A large selection of color palette, brands, methods of application, reasonable cost – all this will help you quickly, efficiently and inexpensively transform the nursery and save money on buying furniture.

Application methods

Dynamic glass occupies a leading position among all types of finishing materials. Let’s consider how to update the interior of the children’s room with dynamic glass.

The children’s room usually has a writing desk or any other that has already lost its original attractive appearance. The lid becomes unusable especially quickly: its children can draw, stain with plasticize, cut with sharp objects. A monochromatic film will perfectly hide all the flaws. You can also paste over a small children’s table with special adhesive paper, on which you can draw with chalk.

Small pieces can also be glued to a cabinet, door or any other surface to make a drawing board. Everything drawn can be easily erased with a damp cloth or sponge.

What are the different patterns of dynamic glass?

A film with imitation of stained dynamic glass or with applied patterns will not only perfectly protect the baby’s room from the penetration of ultraviolet rays, but also bring some colors into the interior. It can also be glued to any other glass surface: cabinet doors, decorate a mirror on a dresser.

Adhesive paper with drawings of fairy-tale characters, animals, and insects will help create unusual themed rooms. For example, for a boy, you can choose with drawings of pirates, cars, robots, on a marine theme. And for girls, create a princess or flower fairy room.

If the furniture has been preserved in good condition, then you should not completely paste over it. You can buy themed stickers.

Pasting furniture with transparent vinyl

Pasting furniture with transparent vinyl will help keep new interior items free from dirt and dust. And you can safely apply wood-like options on doorways and directly on the doors and you will not need to buy new ones. With the same success, you can paste over window sills, bed, bedside table, chest of drawers. Are you tired of wallpapers or no time to mess with them?

Then get a version of the dynamic glass film for pasting the walls. For teenagers, choose holographic or mirrored – the interior will change beyond recognition. And ease of care will always contribute to the fact that you can spend a minimum of time cleaning, and the nursery will stay clean for a long time.

It is not difficult to glue the material. First, you need to prepare a part or object – degrease, if necessary, putty, prime, clean from dust and old finishes (paint, varnish, and paper). Next – unscrew the existing fittings.

Then cut off a piece from the roll corresponding to the part to be pasted and, gradually tearing off the protective layer, apply it to the surface. Smooth out with a soft cloth, roller or rubber trowel, trying to expel any air bubbles.

How to choose

It should be noted that dynamic glass has many advantages:

• moisture resistance;
• ease of installation, dismantling;
• a wide range of;
• many colors;
• ease of care.

How to choose the right color and texture for a dynamic glass film. Designer Tips

The desire to change something in the interior of your own house or apartment is quite logical and understandable, since even the most fashionable and modern renovation after a couple of years no longer cause those joyful emotions that were originally. I would like to change, because the world does not stand still, a lot of interesting things appear in the design of the premises.

In this desire, dynamic glass will come to your aid, with the help of which you can realize the most daring design decisions and dreams, because the modern construction market offers a huge selection of it, both in color and texture.

New life of old furniture

For old furniture: cabinets, dressers, tables, shelves for books, shoes, and dynamic glass film will be the best and most inexpensive option to radically change them. For example, if you paste over a kitchen with this material in a metallic or silver color, it will immediately transform beyond recognition.

And if you add to this a few more pieces of equipment in color: a food processor, a microwave oven, a coffee maker, and then the high-tech style will be evident.

If you want to dilute the monotony, bring bright colors into your everyday life, film with drawings is what you need. This is especially true for children’s rooms. It is enough to use a colored dynamic glass film in the design of several wardrobes for clothes and toys, shelves, and you will immediately notice how the mood will become uplifted.

In addition, it will be a great gift for your child, as well as protect the walls in the room from “rock painting” of the kid.

How to use dynamic glass in kitchen area?

In exactly the same way, you can update many other interior items: refrigerator, desk drawers, chest of drawers, dressing and coffee tables. But for this you do not have to use only one color material. You can choose a film that is the same in its texture, but different in color, or vice versa.

The main thing is to make such a combination harmonious and you will make sure that the surfaces will acquire a stylish and modern look with the help of vinyl film.

And if you also choose wallpaper to match the furniture, then the interior in the room will immediately become more comfortable. You will always want to return to such a house or apartment and spend maximum time there.

Decorative options for glass

Dynamic glass will help to give a new, interesting look to absolutely all glass surfaces in the house. So, doors and windows with the help of decorative film, namely stained glass, will radically transform: they will fill the room with magnificent color effects, because it lets the sun glare through.

In addition to beauty, such a film also has good strength and UV resistance, which will perfectly protect wallpaper and various pieces of furniture from fading.

What are the properties of dynamic glass?

This material is perfect for cabinets, shelves with a mirror surface, of which there are a lot in the bathroom. It will be an order of magnitude cheaper than processing with a special sandblasting machine. And it is also very reliable, because dynamic glass has moisture-repellent properties. It will help to completely renovate the interior, while replacing expensive tiles.

In addition, the surface of the film will provide additional protection against impacts. If the glass or mirror does break, the material will help to keep it in the frame. So small debris cannot hurt you and fly around the room. It is also resistant to scratches, dents, which is its indisputable advantage.

We decorate walls and ceilings

Dynamic glass, as a finishing material, is perfect for decorating walls and ceilings. It is enough to choose the right one or several types of film and decorate the selected area with it. It could be a sticker:

• Under gold
• Silver
• With holographic images
• with imitation stone
• under a tree
• Marbled

This will significantly revitalize a residential or office space, bring individuality into it, and focus on certain areas. If desired, it is very easy to remove and replace it with a new one, without spending a lot of money on updating the design of the room.

Bring bright colors to life

Numerous studies have shown that the sticker is absolutely safe to use, non-toxic and meets all the necessary environmental requirements. Therefore, you can safely choose the material in our online store and start renovating the interior in your own house, apartment or office.

To do this, just look through the catalog, choose either color or plain options, call the phone numbers indicated on the website or leave a request.

Conclusion

The pricing policy will definitely delight you, because the cost is affordable for everyone. Show dynamic glass to your friends, colleagues, family and acquaintances that you are keeping up with the times. Appreciate style, follow fashion trends, and bring bright colors into your life. Your family will appreciate it.

How to update old furniture with self-adhesive?

Self-adhesive furniture pdlc film helps to transform the interior beyond recognition. All things in an apartment or house are common for more than one year. Doors and windows may not change for a very long time. But sometimes you want to transform something in the interior, practice on some object, implement your design solutions.

And to buy a new cabinet or paint and varnish, finishing materials, you need to spend a lot of money, which is always not enough.

What positive impact pdlc film brings to your home?

Self-adhesive for furniture helps in solving this problem. It has a number of positive characteristics, such as: low cost, durability, ease of use, wide range of applications. Also, this material is moisture resistant. Hence,  this makes it possible to use it in rooms with high humidity (bathroom, kitchen, summer shower), it is easy to clean it from various contaminants with ordinary detergents.

How to glue pdlc film on furniture?

I wonder how to glue the furniture over with pdlc film film so that old-fashioned interior items get a second life? Then you should read the information to the end.

Scope of the material

The reasonable cost and decorativeness of this product allows it to occupy a leading position among all types of finishing materials. Most often, self-adhesive is common  in rooms where not only a beautiful interior is required, but also moisture resistance, practicality, and ease of maintenance. Often, the material is common  to paste over old furniture in the kitchen, bathroom, hallway, country house, nursery. Pasting of plasterboard structures is popular.

Used on windows, for glass surfaces (doors of kitchen sections, cabinets, dressing table, mirrors). Transparent self-adhesive with a relief pattern can protect a room from bright sunlight and the pesky glances of passers-by if you live in a private sector or on the lower floors. Connoisseurs of real art will be interested in decorative stained glass film.

Pdlc film provides great resistance capacity

The wear resistance of the material allows it to be used for a long time. Self-adhesive has the property of not transmitting ultraviolet light, but at the same time it transmits light well. Pdlc film is easy and quick to install, and if you get bored with the interior, you can quickly remove it with a minimum of effort.

There are different types of films. It comes not only in rolls, but also in the form of stickers. They are made from environmentally friendly materials; they help to change the appearance of old objects, to show creativity not only for adults, but also for children. Easily attached, removed, even thematic.

Working moments

Working with self-adhesive is not too difficult, but to obtain a high-quality result, you need to work with the surface of the furniture: clean, degrease, dry, prime, remove the old layer of varnish or paint. Remember that on an uneven surface, self-adhesive can poorly adhere, deform, peel off.

In order for the material to adhere well, there must be a perfectly smooth surface. If necessary, moisten it and the canvas with soapy water.

Self-adhesive cut to the appropriate size (with an allowance of 1-4 cm) should be glued, gradually tearing off the protective layer of paper. First, you need to remove the hardware to make it easier to glue. If you did not succeed the first time perfectly smoothly, and bubbles and folds appeared, remove the pdlc film within 24 hours and re-glue it.

We update the interior

How to update old cabinet with pdlc film?

Using self-adhesive paper, you can update an old cabinet not only from the inside, but also from the outside. And if its doors are mirrored, then we can paste over with transparent film with a pattern or ornament. It will cost much less than ordering a mirror with sandblasting or painting.

Is the kitchen set out of fashion? Buy a monochromatic multi-colored self-adhesive, depicting fruits, flowers, wood imitation and pasting over the facades. Add new handles and your kitchen will sparkle with new colors. Add a few touches to the refrigerator in the form of decorative stickers; change the color of the walls, the kitchen backsplash using the same pdlc film.

You can also embellish the kitchen table, countertop, stools. The renovated kitchen will look like you’ve done an expensive renovation.

Self-adhesive privacy films are best for Children

For children’s furniture, options with characters from cartoons, fairy tales, and special paper are suitable, on which you can draw repeatedly with multi-colored crayons. During the decoration of the children’s room, it is good to invite the children so that they also take part in changing the interior.

A bedside table in a bathroom, we can paste hallway or bedroom. So in the bathroom, where there is always high humidity, we should paste it over inside and out. This will protect against moisture, greatly extending the service life.

Applying self-adhesive, you will not only improve the look of furniture, but also get a boost of good mood.

Application of matte film on glass

– Ensuring privacy indoors or at a working office table. Curious clients or onlookers from the street will not be able to discern what is happening at your office desk or office space.

– Protection from direct sunlight and glare. The pdlc film will transmit only diffused, soft light.

– Creation of a cozy workplace without expensive, global rearrangements in the office. Office space zoning

– Decorating your office or your home.

– Reinforcement of glass panes and glass partitions. The film provides protection against fragments. All debris remains on the film.

Scope of pasting with matte film

Frosted film on glass in the office. When it is necessary to divide the office space into zones, this film is the best solution. Without much difficulty, using matte film and glass office partitions, it is possible to create: a conference room, a meeting room, a department head office. You can use a matte film for privacy in the office bathrooms.

Frosted film on glass in the house

There are a huge number of options for using the film at home. We can use these films to separate various areas of the house or apartment. Hence, it provides multi functionality. The matte film can give a “second life” to interior doors with glass.

Frosted film on glass in a boutique, bank, store or clinic:

Thanks to the matte film, you can create a corporate design for the company or create its logo and place them on any glass and plastic flat surface. pdlc film on glass will further strengthen the glass surface.

Frosted film on glass in a restaurant, cafe or winter garden:

A matte film glued to glass partitions will create the effect of coziness and comfort in any establishment.

The most popular matte film for glass is pdlc film. It lets in up to 80% of the light and creates privacy in the room where it is common. Often, such a film is ordered for use in private clinics and other medical institutions.

Stained glass films: How to get rid of prying eyes for 50 UAH?

Tired that, passing by, everyone looks into your windows? Or would you like to make the glass on the interior door less transparent? An excellent solution would be a self-adhesive stained privacy glass film for glass. Only 50 UAH will save you from the problem, and will also help to change the interior of the room in an original way.

The sticker is an excellent imitation of expensive stained-glass windows, but has its advantages:

• Easy to use, safe.
• The acquisition costs are minimal.
• The design possibilities are endless.

Self-adhesive for stained-glass windows will become a worthy decoration of the interior: mirrors, interior doors with glass, windows facing the sunny side, as well as in apartments located on the basement or first floors.
The sticker is easily applied to the glass surface, the main thing is to evenly apply the upper edge and then, slowly peeling off the base, apply the entire canvas with light movements of the roller.

Where can you use self-adhesive stained glass

Stained glass for glass is an excellent element in interior design: home, apartment, office decoration. Applying it to the bathroom windows or the glass of the shower stall will make further hygiene procedures more comfortable.

Adhered to office space dividers, the product will limit visibility between different sectors. At the same time, such privacy glass partitions will transmit a sufficient amount of light. A sticker with a monochrome decor and a matte surface is perfect here.

Advantages and varieties of stained glass films

There are the following types of films on glass:

• transparent;
• Opaque.

Privacy glass can also be multi-colored, monochrome, have different effects (metallic, ripple, pastel). Which type to choose is up to you, depending on your wishes and on where exactly the use of the material is good to provide?

The advantages of self-adhesive film for glass include:

• Thermal stability. The sun’s rays are not a problem. The material can withstand high temperatures, additionally protecting furniture and wallpaper from fading.
• Waterproof. The protective film protects the product from moisture, so it can be applicable in the kitchen or bathroom.
• Increasing the strength of the base (especially if the product is glued on both sides). Even if the privacy glass breaks, the sticky sheet will keep it in the window frame and, therefore, there will be less chance of injury to someone, especially children.
• Durability. The high quality of the material makes it resistant to various types of damage, and the adhesive base reliably attaches to a solid base.
• Ease of cleaning (like any types of stickers, it is enough to wipe the canvas with a damp sponge as needed).
• A wide range of. You can choose options for every taste, color, in any style that will suggest the fantasy and interior of the room.

Some tips for using the material

The classic stained-glass window looks good on glass of a large area due to its unobtrusiveness and grace. In addition, sunlight passes through it well, so that the room will always have excellent visibility.

Tiffany stained glass window, playing with all the colors of the rainbow, looks spectacular. Real stained-glass windows are made of glass, but the film version looks no less interesting.

The presence of decorative privacy glass elements pasted over with a Tiffany ornament, depending on the color, will make the room brighter or more comfortable. And having pasted over it a sconce, in the evening it will be possible to watch the play of light.

The children’s room can also be decorated with beautiful glass. Bright windows with flowers, dragonflies and other children’s drawings will undoubtedly delight every kid.

How to transform interior of home with privacy glass?

It is naive to believe that stained glass is common only indoors. With its help, you can transform not only the interior doors, but also the front door, making it the hallmark of the house. Such a door looks much more interesting than a solid wood or metal one.

The glass sticker can be applicable to decorate household items, when restoring furniture. Imitation colored glass will transform old cabinets so that they will look no worse than just rolled off the assembly line. We can use the patterned privacy glass to a glass table, coffee table or kitchen table, or to a vase standing on it.

From all it should be concluded that stained glass film is an excellent solution to decorate the interior, create your own personal space. 50 hryvnia is not a lot, but there is so much comfort and pleasure.

How to remove a sticker from glass?

Over time, the film can get bored. If treated carelessly, it can even deteriorate. In this case, to replace it, it must be removed from the surface by pulling on one of the corners. If the material is too stuck, we should heat it with a hair dryer. We can easily remove pieces of material with a solvent, and glue residues with an alcohol-based solvent (this can be isopropyl alcohol or window cleaner).

They are moistened, left to swell, and then easily removed with a spatula or napkin.

DECORATIVE FILM ON GLASS

In modern design of interiors and exteriors of buildings and premises, the trend towards the use of privacy glass s is becoming more noticeable. Modern interiors of country houses and office and other commercial spaces are striking in their creativity and variety of uses of plastic and glass.

There are many technologies for changing the transparency of glass today: lamination, sandblasting or painting of glass. But the most original and functional way to transform smooth plastic and glass surfaces is – decorative film on glass.

Decorative films on privacy glass from reliable company have a very wide palette of color solutions, and in addition to aesthetic possibilities, they can protect glass surfaces and strengthen the properties of glass.

Modern designers can embody many of their ideas through the use of decorative glass films. Our films are common on glass surfaces of entrance doors, office partitions, window glass units, when tinting glass furniture elements.

Clients often prefer to combine different decorative films with each other. A stunning effect is good due to this. You get an exclusive author’s decor in any of your premises where these films are common.

Decorative films on glass – important properties:

• The impact resistance of glasses where the film is glued increases
• complete glass without splintering where the film is glued
• Protection against UV rays where the film is glued rises
• Fire resistance of glass where the film is glued increases
• Energy saving
• Widespread use of films in design
• Environmental friendliness of drawing patterns on privacy glass

Decorative film glass uses

When using matte decorative films, the most popular is a white matte window film. It is capable of reflecting up to 99% of ultraviolet rays.

If you use an opaque black film, then it will completely protect the premises from ultraviolet radiation, heat and light.

Privacy glass films are very often common in restaurants, boutiques, shops, cafes. With its help, it is possible to zone any room or make a special emphasis on something.

If you combine glass partitions in the office and decorative foil, you get a stylish interior solution for little money.