5 Ways to use Smart Film Window in 20222022-05-27
Tinted film on double-glazed windows in a private house
To protect rooms from the sun, until recently, blackout tint film was mainly good for smart film window. Such a coating did not transmit light, but it did not save from overheating, as it accumulated energy itself.
Over time, manufacturers eliminate this shortcoming and today they offer a fundamentally new protection from the sun. This article will tell you about the types of new tint films, the main differences between them, the method of installation, and also help you choose the right polymer coating.
Types of dimming tint films and their main differences
Depending on the type of film for double-glazed smart film window, it helps to solve different problems. It can darken rooms, keep rooms warm, improve the safety of double-glazed windows, protect against overheating and provide privacy.
Thanks to this material, it is possible to quickly adapt windows to current needs. The properties of the films determine by the composition of the layer that applies to them during the production process.
The metallized coating is capable of reflecting different waves from the spectrum of sunlight, so it is this coating that largely determines the properties of the films.
There are more and more multifunctional coatings on the market that are able to simultaneously solve several problems – reflect the sun’s rays, keep warm, provide privacy and decorate smart film window.
House with sunscreen on windows
Sun protection film
This type designs to protect the interior from overheating and reduce the intensity of natural light. Most buyers associate solar control smart film window with a color coating that darkens rooms. However, in fact, mass-dyed polyester intends for other purposes. It is good to decorate windows.
To protect against the sun, other films are produced today:
- Reflective – have a mirror surface and darken the room.
- A Thermal – do not let in ultraviolet and infrared rays, but do not darken the room.
- Multifunctional – protect against overheating in summer, and help retain heat in winter.
A thermal film on the windows of a country house
Window tinting with an inexpensive sun-protection film with a mirror effect is obsolete. This method is mainly good only in cases where it requires darkening the premises with minimal costs.
Now thermal and multifunctional coatings are popular, since they almost do not reduce the light transmission of double-glazed smart film window. Such a reflective film glues to windows, doors, as well as balcony and roof glazing.
Mirror film visibility
A real mirror film does not impair visibility from the premises. Tinting plastic windows and aluminum or wooden structures with this coating allows you to protect yourself from the sun and provide privacy at the same time.
There are also smart film window with heat-saving and protective properties. This type of polymer coating is able to imitate a regular or bronze mirror and colored reflective surfaces with a gloss effect.
Such a film also calls anti-vandal or anti-burglary, since it is able to provide protection from the street.
Mirror film on the windows in a country house
At night, when the lamps turn on inside the rooms, the mirror coatings lose their effectiveness and cease to provide one-way visibility. This factor must be taken into account by the owners of premises on the first floors.
All polymer coatings that glue over glass make smart film window impact resistant. The difference between them lies in the ability to withstand the impact of different forces. In addition, a protective film glues on the double-glazed windows to prevent fragments from flying apart.
That is, the polymer coating may have a low impact resistance, but in any case it will help protect against injury. However, such a one-sided window film cannot function as a basic protection. To ensure a higher level of security, it requires using a material with a thickness of multilayer polyester from 110 microns.
Impact-resistant film on the window after glass breakage
Such a tinting film glues on smart film window to decorate openings, shop windows and is often good for facade glazing. It is dye polyester. Therefore it accumulates heat and reduces the light transmission of double-glazed windows. When choosing a color, keep in mind that decorative films have different transparency.
Decorative films of the new generation are multifunctional. Thanks to additional spraying, they reflect heat rays and exclude heating of windows.
Such a protective film applies to double-glazed smart film window in cases where it is necessary to decorate windows and prevent temperature rise in the interior. This polymer coating may have a glossy surface with a glare suppression function.
Architectural and facade films
Architectural and facade smart film window is no different from polymer coatings known under other names. They also serve to provide protection from the sun and decorate buildings.
It’s just that these two terms are sometimes good as generalizing for all types of films – shockproof, decorative, sunscreen and a thermal. In some cases, a film with the effect of one-way visibility can be a facade film.
This is due to the fact that such polymer coatings are good in fully or partially glazed business centers and shopping malls to ensure privacy. Such films limit the view only from the side of the street. In addition, the outer film can call facade.
Facade film in the business center
Films for euro windows
Euro windows include structures assembled from aluminum, plastic and wooden profiles. An additional feature of these models is the presence of double-glazed smart film window, tightness contours and modern fittings.
The film on euro windows applies in exactly the same way as on old-style carpentry structures. In all cases, it glues to the glass. That is, there is no fundamental difference between polymer coatings for different types of windows.
Exterior window film – how is it different from interior?
If windows fit with tinted double-glazed smart film window, which makes using body-tinted glass, internal films will not be suitable for providing effective protection from the sun. With this configuration, there is a high probability of overheating.
By the time the heat waves reach the reflective surface, they have already had time to heat the colored glass. On the way back, after reflection of the waves, the heat transfer process will repeat. That is, the use of internal films in such cases practically does not make sense. After all, the smart film window is still heated.