What are the requirements for self-adhesive privacy window film?

A separate house with self-adhesive privacy window film is the dream of millions of people. Peace, comfort and independence beckon and motivate us. But as soon as the dream comes true, new questions arise. They relate to everyday life in unusual conditions (especially if you move out of the apartment) and can literally drive you crazy.

We will talk about one of the most difficult ones – which privacy windows to install in a private house.

Let’s talk a few words about the features of self-adhesive privacy window film in houses. The main and most noticeable feature of windows in cottages, and country houses is their large area. This is not common for everyone, but this decision is quite common. This allows more light and heat to enter the room. But in winter it is fraught with heat loss.

What are the requirements for self-adhesive privacy window film?

More stringent requirements impose on the windows of a private house than in an apartment, but their list is standard:

• Durability
• good thermal insulation qualities
• strength and safety
• Environmental friendliness.

The choice of design and installation of windows

Experience shows that self-adhesive privacy window film for a country house is much better than wooden ones. They are more affordable, no less environmentally friendly, do not burn, do not suffer from temperature surges, shocks and other damage.

Experienced installers will be able to integrate plastic windows even into the now popular wooden houses.

Select right profile for self-adhesive privacy window film

When choosing, everything plays a role, starting with the profile. It can have three, four, or five air chambers. They are responsible for sound and heat insulation. The main principle here is compliance with the conditions.

If the house comes in a relatively warm and dry place, three cameras will be sufficient. If it is cold or noisy around, you should choose a four- or five-chamber profile.

A neat self-adhesive privacy window film appearance is also extremely important. Therefore, we advise you to select profiles made of glossy PVC. They are less dirty and easier to clean. This material is usually of higher quality.

The factor of privacy window film ventilation

Ventilation is considered by many to be the weak point of plastic windows. But this betrays ignorance of the situation and new products. On sale, most manufacturers have windows with a micro-slot ventilation system and valves for air intake.

After making a couple of movements, you can switch this design to micro-ventilation mode. This eliminates the problems of fogging and stagnant indoor air.

Pvc windows for a private house

As for the self-adhesive privacy window film, on which heat preservation mainly depends, the only suitable solution is two-chamber models. They will not allow freezing in winter and will not fog up to a temperature of -20 degrees.

If you still have questions and doubts when choosing, you can see photos of houses with plastic windows. You will find that among them there are brick, block and wood.

Choose the right windows for your home and entrust their installation to professionals.

Automotive insulation film is a type of film that is composed of many layers of different materials or coated with many layers to create a spectrum filter.

According to scientific studies, the temperature in direct sunlight is formed from 3 main light sources which are:

• Infrared: 57%
• Ultraviolet: 5%
• Visible light: 38%

The task of the automotive insulation film is to filter the spectrum to remove infrared and ultraviolet rays (ultraviolet rays) up to 80-90% and still ensure the glass still has transparency and light transmission. The height does not interfere with the visibility of the driver and the occupants of the vehicle.

“Today’s best self-adhesive privacy window film offer up to 65% insulation”

Features of automotive insulation film

On the market today, there are 4 common types of insulating film coating technology:

Nano Ceramic – Nano ceramic glaze: Modern technology features but very high cost, providing good insulation effect.

Sputtered film – metal sputtering: modern technology, high cost for good insulation effect

Metalized Coating Film – Metallic coating: medium cost for moderate insulation.

Dyed Film – dyeing: the simplest technology with the cheapest price but the least effective insulation among the 4 types of insulation technology

The world’s best automotive film brands are currently using the first two technologies, Nano Ceramic and Sputtered Film (metal sputtering).

Normally, automotive film will be pasted in the following locations:

• Windshield
• Glass on both sides of the car front and back
• Rear view mirror – back glass

Should car window film be pasted?

The main reason is the high temperature in the car is due to the car glass. This part is the place to absorb the most heat and solar radiation and cause the most damage to the interior of the car as well as to the people in the car.

Although the body of the car is metal, it is reinforced inside with a variety of insulation materials, so it does not cause heat like car glass. In contrast, car glass occupies a large area and directly transmits light, transmits heat and absorbs radiation, but has no shielding material.

Materials such as rubber or plastic back are difficult to use to combat hot for glass because it will drag out of the car and very sight dangerous moving car.

Self-adhesive privacy window film is Best against Heat

Preventing car glass from absorbing heat and radiation by using fabric sunshades or plastic nets is not effective because these sunshades only have the function of helping to reduce the sun.

Luxury car manufacturers such as BMW, Audi, Mercedes… are gradually equipping their cars with self-adhesive privacy window film instead of ordinary glass. However, popular Japanese or Korean cars or brands have not yet applied this type of glass because the cost of the car will be very high.

Car window film completely solves the problem of insulation, reduce radiation and reduce sunlight for car glass, and at the same time do not obstruct the view of people in the car and the cost of car window film will be reduced not as high as equipped with insulating glass on the car.

The benefits of gluing automotive insulation film

Stabilizes the temperature inside the cockpit, avoiding excessive heat gain

Having the ability to reduce up to 65% of the solar heat absorbed by car glass, insulating film is a method to help balance and stabilize the temperature inside the cockpit, especially during hot weather in summer.